The reel is a component part of any spinning. All her work is reduced not only to throwing and winding fishing line during fishing, but also to fishing large fish without the risk of breaking the rods due to the braking mechanism. But all these operations can be performed successfully only with a reliable coil.
This directly depends both on its quality and on some features of the mechanism. Before choosing a reel for spinning, you should decide on the choice of fishing method. So, jig fishing is impossible without this heavy type device with a large fishing line capacity. In the case of ultralight fishing, a small light reel is quite appropriate. In each case, an individual approach is required.
Varieties of Coils
The following types of devices are available: inertial, inertialess and multiplier. More details about each of them will be described later.
Inertial coil
Consider this device on the example of a domestic coil called "Nelma". Namely, we note all the advantages of this inertial coil, in which new developments have been applied. This analysis will be addressed to those spinning lovers for whom this option of the indicated device is optimal. This is important when solving a specific issue. It consists in how to choose a reel for spinning.
The drum of this device, having a diameter of 95 millimeters, is not deformed in the hands. This coil is equipped with two stainless and sealed ball bearings located in the axial assembly.
Below are some of the classic advantages of an inertia coil. Namely:
- Mounted on a spinning line, passing between the fingers during posting, allows the angler to feel the slightest movement of the bait and bite. Only the inertial coil has such high sensitivity.
- The absence of a gearbox in this device allows lossless transmission of the brush pressure to traction, bringing it up to 15 kilograms. This is two times more than the inertialess reels manufactured by Daiwa, which have established themselves as the most powerful.
- Naturally, skill and dexterity in the management of this device is required. This is to avoid the formation of a "beard."
- This coil uses an aerodynamic brake. That is, there is a valve on the drum, when opening which air enters. This contributes to the rotation of special wings that work like an aerodynamic brake. At the same time, part of the inertia of the drum is suppressed. This allows the use of baits weighing 7 grams.
- This coil is also equipped with a braking system. It is an important function. It provides a friction brake. It is an essential element. Tightening it, you can adjust the braking force so that there is no "beard". This is the case when the weight of the bait exceeds the seven-gram starting range.
- The uniqueness of this coil is the possibility of using braided cords in it. This is due to the direct descent of fishing line from a large-diameter drum, without reducing flight range.
Of course, when working with a spinning reel with such a coil, 100 meter throws will fail. However, often this is not necessary, since fishing, as a rule, takes place on a boat. As for the accuracy of casting and the subsequent sensitivity of the wiring, this type of the indicated device copes brilliantly with this task.
Spinning Reel
To start mastering spinning, experts recommend stopping on an inertia-free reel. It includes a spool. On it, in fact, is placed the fishing line, rotor, body and handle.
The geometric dimensions of the spool correspond to the parameters of the coil. This is important to know. The permissible length and diameter of the fishing line are indicated on the spools. Namely, in its part, which is called a skirt.
When deciding on how to choose an inertialess reel for spinning, it is necessary to pay attention to the characteristics of the spool rim. Namely, the high strength of the metal from which it is made, as well as its smooth surface.
The fishing line is wound on the spool with a special mechanism. It provides the movement of this element forward and backward as the rotor rotates.
Using a long screw, the fishing line is laid crosswise on the spool, and as a result, a very dense bobbin is obtained.
In a regular reel, the fishing line is not level. That is, dips are formed between adjacent turns. This leads to additional friction during casting.
On sale you can find these reels that are equipped with a system that prevents tangling of fishing line. That is, it provides protection against the formation of a beard. This is a tapered roller of a completely new profile. At the end of this element there is a small slot. On it the fishing line rolls down. This factor is significant. This minimizes tangling of the line when pulling through the roller.
Baitcasting reels
These devices are not so popular among anglers. This is due to the lack of reliable information on its merits.
In this case, the fishing line, unlike the inertialess reel, is wound on the spool without a stacker. Using this device, you can feel every nuance of the bait's wiring. This is due to direct transmission.
If the casting technique has been worked out, that is, the movements are smooth and accelerated, then the most accurate throwing can be achieved with the multiplier gear. These devices are in good harmony with light and short rods. They do not always work with heavy baits. This should be known when deciding how to choose a reel for spinning.
These devices are most often used when jigging or trolling.
Specifications
Coils like cars are speed and power. On the body of this device are applied numerical proportions. They show the number of revolutions of the rotor with one rotation of the handle. It is these numerical designations that divide them into speed and power. For example, both types of reels will suit pike lovers. We will consider each of them in more detail below.
Speed coils
In these devices, gear ratios from 5.5: 1 to 6.2: 1. These reels are lightweight and not suitable for catching large trophy fish. Having impeccable balance, high sensitivity, as well as long-range casting, she copes with brisk fish perfectly. This is important to know when deciding how to choose a spinning reel. The rear brake of these devices has an additional lever, which allows to reduce the force.
Power type coils
These devices allow you to catch large and powerful fish. The gear ratios in them are from 3.5: 1 to 4.5: 1. Freedom of rotation, ease of survival of this reel is provided by 5 bearings built into it. In addition, they, being a soft braking unit, make it possible not to jam this device during sudden movements and jerks of fish. The handle with a large shoulder makes it possible to put pressure on it with a large catch, without fear of breakage.
Coil Classification
This is an important characteristic of these devices. At the moment there are coils of 4 classes. Each of them corresponds to a spool of a certain forest capacity. It is important to know this when deciding how to choose the right reel for spinning.That is, for example, a class 2000 reel has a spool that holds a fishing line 100 meters long and 0.2 millimeters in diameter.
The market is replenished every day with increasingly lighter types of these devices. At the same time, their reliability is not diminished. This is done for a reason. Since the lighter the reel, the more comfortable and pleasant the fishing. However, being too fond of this is unacceptable. Among fishermen there is a conditional criterion in the correct choice of the weight of the specified device. It is important to know this when deciding which reel to choose for spinning. This criterion is that the mass of the specified device is equal to twice the weight of the rod with an error of 30 grams.
How to choose the right reel for spinning: parameters
In this case, these are:
- Ride.
- Type of spool.
- Staples.
- Fractional brake.
- Lever.
- The number of bearings.
We consider each parameter below.
Ride
This factor lies in the fact that during rotation, the coil parts should not hurt each other and emit a crunch. This should be known when deciding which reel to choose for spinning. Smooth running ensures the quality of the fishing line. This subsequently determines the range of the bait.
Spools
This is a container of fishing line. In ordinary spools with simple geometry, the ratio of its depth to length is equal. This circumstance complicates the casting of light bait. Since there is additional friction of the fishing line on the side.
The depth of modern spools is significantly reduced. However, to maintain the previous capacity of the fishing line, its length has been increased. In addition, they are equipped with a certain "skirt". This makes it almost impossible for the fishing line to hit the axis. Such spools do not create problems with long casts and light baits. This should be taken into account when deciding how to choose the right reel for spinning.
These elements can be made of both metal alloys and plastic.
The main theme is the side of the spool. Since it is in direct contact with the fishing line when casting and reeling. The side should not have any irregularities. This is significant in determining how to choose a reel for spinning. If braided fishing line is used, then the spool is selected with a side made of solid material so that you can "hold" such a fishing line. Coils with plastic spools are not suitable for such cords. When catching large fish, these large-sized items are selected.
Staples
This part must be securely and flawlessly fixed in the open mode and not closed spontaneously, but only with a clear movement of the angler’s hand.
Friction brake
Well-adjusted this element helps fish fishing. If the load on the tackle becomes critical, then the friction brake, turning the spool, provides a line drop under the pressure of a powerful opponent. This quality element does not jerk the line.
The friction brake can be front located in the spool or rear located in the back of the housing. This should also be considered when deciding how to choose a reel for spinning.
Despite the heavy weight, the rear friction brake can be easily adjusted unlike the front. This is an essential fact.
The front friction brake has high sensitivity, light weight, but practically negates its adjustment when playing fish.
Number of bearings
Their optimal number should vary from 3 to 7. One of which should be in the roller layer. This should be considered before choosing a reel for spinning. This ensures a smooth course of the fishing line, as well as high ease of gear management.
Lever
It should rotate easily and smoothly. Mounting options may vary. Namely, screw and rivet. However, they must be performed with maximum reliability.
How to choose a reel for spinning on a pike?
All of the above criteria will help in resolving the issue and in this direction. From many newcomers to this case, one can also hear: "Help me choose a reel for spinning." In general, for this individual, the best option would be to choose multiplier and inertialess models. Their description is presented above. All the criteria indicated in the text will fully help in deciding how to choose a reel for spinning on a pike.
Total
Having carefully read this text, everyone can gather a lot of useful information. It will help to decide how to choose a beginner for a spinning reel.
