There are a lot of people who want to start their own business. Many people are gradually disappointed in working for the state and are looking for opportunities to get stable, big earnings, so that they do not depend on anyone except themselves. Entrepreneurship today is a fairly common occurrence. Therefore, there is nothing strange in that there are a lot of people who want to open their own business.
Which industry to choose to start your business?
There are a lot of ideas for your own business. And the production of corrugated board can be attributed to one of them. This business is very attractive, so the main expenses will be spent only on the purchase of equipment. All the necessary resources for construction are increasing in value more and more every month. And among the most popular materials, corrugated board can be distinguished. It is used at any construction sites.
Where can I use this material?
The production of corrugated board is very popular, since this building material is used as:
- Facing element.
- Frame for those objects that you want to build as quickly as possible.
- Fences in any territories.
- Roofing material.
- Formwork, which is optional to remove. It is usually used in monolithic construction of buildings.
- Auxiliary material with which you can arrange visors, awnings, skates, ebbs and other numerous products.
Is this entrepreneurial venture highly profitable?
Decking is used in almost any field of construction. Profitability also reaches quite a good level. The production of corrugated board is therefore very profitable. The approximate cost of 1 ton of galvanized profiled material, whose thickness is about 0.55 mm, reaches 300 thousand rubles. About 250 square meters of sheet can be produced from this amount of building resource.
Considering that the average cost of 1 square meter of profiled sheet reaches an average of 250 rubles, then the revenue from the total volume completed will amount to 600 thousand rubles. Is it not true that the production of corrugated board is very profitable? The profitability of such entrepreneurial activity will be about 40 percent.
What equipment can be purchased for the first time?
In order to establish a business, you will need equipment for the production of corrugated board. Factory lines, with which you can create the necessary material, will be quite expensive. However, you can take a compromise for the first time.
This is a manual bending machine that can be used in the home production of profiled sheets. The price of such a machine reaches 600 thousand rubles. But drawing up a business plan for the production of corrugated board, you can understand that these costs will pay off pretty quickly.
A manual machine is not too expensive, but most importantly compact equipment. The quality of all the necessary work is in no way inferior to the products that the corrugated board production line produces. That low cost, which is typical for manual equipment, is primarily associated with not very high performance. In addition, you can only work with those sheets whose thickness does not exceed one and a half millimeters.
Manual equipment makes it possible to work with whole rolls of sheets.Pre-cutting is not needed. In addition, thanks to the use of a special mechanism, efforts are not required to work. Everything can be done with one hand.
The optimal line for the production of profiled sheets
Included with the machine, a knife made of special alloys with high strength comes on sale. With its help, you can cut the necessary products. The length of the profiled sheet can be changed in accordance with the wishes of the customer.
The principle of operation of the machine is quite simple, therefore, no problems in this situation will arise. Accordingly, after entrepreneurship begins to bring tangible income, it is possible to improve the production of corrugated board. Equipment whose price is higher will be easier to purchase. So, in the best case scenario, you will need to purchase:
- unwinding machine;
- profiling machine;
- guillotine;
- Control block.
Who is better to buy resources and where to place your company?
It is necessary to buy equipment for the production of profiled sheets from those suppliers who are located as close as possible to your enterprise. In this case, installation and further maintenance work will be greatly simplified. In order to carry out installation, you will need to find a room with an area of at least 50 square meters. It can be rented. The necessary premises can be located outside the city.
Which staff will be required?
In order to service one machine, it is necessary to hire about two workers. They do not need to be specially trained, since absolutely all processes are not particularly complex and occur in automatic mode. One worker will work with the control unit. Another employee will take and stack finished products.
The popularity of building material is growing
Profiled sheets in modern conditions are very high among numerous building materials. And in some relevant areas, it has become an indispensable element. And today there are several types of this material that are used in a variety of industries. You need to know this if you plan to open a factory for the production of corrugated board.
So, there are the following types of profiled sheets:
- roofing;
- bearing;
- wall;
- facing;
- sandwich panels.
To work with such material as corrugated board is quite easy and simple. It has such parameters as:
- high durability;
- light weight;
- simple installation;
- low cost;
- good appearance.
The production of metal and corrugated board today has gained high popularity also because the material is highly resistant to a variety of temperature and climatic changes. That profiled sheet, which will be pre-treated with special polymers, will become indispensable in those places that are most susceptible to corrosion.
What consumable items will you need to face?
If you want to establish your own production of this material, then you should know what costs you will have to face.
- You will need to purchase the necessary equipment. This will take about 1 million rubles.
- It will be necessary to find a room for production. Rent will cost 240 thousand in one year.
- It is necessary to hire all employees, without which nothing will work. About 360 thousand rubles will be spent on salaries per year.
- Advertising activities will require about 50 thousand rubles.
- Transportation, maintenance of transport - another 50 thousand rubles.
Thus, the amount of initial capital should average 1 million 800 thousand rubles. However, all this amount will pay off quickly enough.
Expansion of the enterprise should not be forgotten
Over time, you can expand your business by acquiring a special machine, with which you can arrange the production of another material popular in the construction industry. This is a netting net. With the help of this technique, it is possible to produce two types of protective materials at once.
In addition, the process of creating one type of material will not be different from the design process of another type of building element. Therefore, there will be no need for additional labor, as well as for training existing employees.
Conclusion
If you decide to start your own business, then the production of such material as a profiled sheet is the most optimal. Investments, although large, but they pay off already after six months. And with vigorous activity, everything can pay off much earlier. The main thing is not to forget about your company and increase the number of services provided. Then the business will grow. Accordingly, profitability will not remain at the same level.
