Today, materials such as aerated concrete blocks have been used in the construction industry. They have a sufficiently high durability and great strength. In addition, reliability is characteristic of aerated concrete, not to mention the excellent insulation parameters. Blocks can be attributed to such building materials that are environmentally friendly.
Prerequisite for organizing a business
If you want to start your own business, you should understand that you must first purchase equipment for the production of aerated concrete. What can be said on this issue? The main devices that can be used in the manufacture of building material should be listed.
Basic devices for production
With the help of semi-automatic machines, you can significantly increase the productivity of the entire enterprise as a whole. In order to take advantage of this opportunity, you must purchase a unit called "STROM-aerated concrete". The main unit in it is a mixer. Capacity is necessary so that from all used components it is possible to obtain the necessary material. Mixing is carried out due to the blades, which are located on the shaft.
Output unnecessary items
The liquid obtained using all the main components, as well as through the use of a special blowing agent, is discharged from the mixer through hoses. This happens by gravity. The mixture fills out forms in which it solidifies in a few hours. Thus, equipment for the production of aerated concrete of this type produces the final material.
The main advantage of the installation
Among the advantages that this installation has, one can distinguish high mobility. In other words, it can be transported quite easily from one place to another, depending on where the construction takes place.
What equipment should be purchased without fail?
You will need to purchase a production line called "ASM-10MS". Such equipment should be understood as a stationary installation, which serves as an activator mixer. The main distinguishing feature of such a line is that the forms are clearly fixed in a certain area of the equipment.
In other words, they are not mobile. The mixer itself can move from one mold to another along special rails. The model is more complex in design. In addition, it is much more difficult to establish, as, in principle, and use it. In order to install the production line, you will need to rent a room. Accordingly, the entrepreneur will have to purchase transport, through the use of which material will be transported to construction sites.
The best choice for organizing production
When purchasing equipment for the production of aerated concrete, the main attention will need to be paid to the conveyor line. At present, it is rightfully considered the optimal solution if it was decided to organize its own enterprise. Equipment can work around the clock, as most processes are fully automated.
This reduces the number of employees to a minimum. Accordingly, you can save quite a lot. The main feature of such a technological line can be considered the fact that the dispenser and the mixer are in a fixed state.Forms themselves move along a special conveyor.
Key Points to Consider
Today, the manufacture of building material occurs in several ways. Equipment for the production of autoclaved aerated concrete is currently available in Russia. Therefore, we can say that enterprises that specialize specifically in the production of such products are more common in our country.
A non-autoclave method may be chosen as a specialization. In this situation, the entrepreneur will need to import all the necessary materials from other countries, including equipment for the production of non-autoclaved aerated concrete. However, it will be too expensive.
Small business organization
In connection with all of the above, we can say that the best choice would be to set up semi-automatic production. In this case, the appropriate equipment for the production of aerated concrete will be the best option.
Such equipment is usually used in small and medium enterprises. It has an average capacity of up to 21 cubic meters per day. Among all the above installations can be distinguished "STROM-aerated concrete". This is the most suitable equipment for those who want to open their own enterprise.
Main devices of the technological line
Equipment for the production of aerated concrete blocks includes the following units:
1. Vibrosieve.
2. Forms with which it is possible to produce cassette gas blocks.
3. Gas generators, hardening accelerators, hydraulic trolleys.
4. Dispensers of components.
Those installations that are produced today may differ in size typical of mixing chambers. They can vary in volume from 800 to 1000 liters.
Using additional devices
The production line for the production of aerated concrete implies the presence of additional plants. In this case, we are talking about steam generators, mixers, compressors, connecting hoses, metal collapsible forms.
More expensive equipment
When expanding your enterprise to large sizes, you will need to think about purchasing an automatic production line. In one day, such equipment can make it possible to produce about 32 cubic meters of building material.
German equipment for the production of aerated concrete has proven itself well. However, its value cannot be called small. The price of such equipment reaches 700 thousand rubles. For comparison, we can cite the cost of the installation "STROM-aerated concrete", operating in a semi-automatic mode. The price of such equipment reaches 100 thousand rubles.
Acquisition of cheap installations
It is possible to produce building material in various other installations. Among them can be distinguished "Aerated concrete-Master 230". The cost of such a device reaches about 30 thousand rubles. This installation has loading and exhaust windows, the volume of which begins with 23 cubic meters.
Features of this equipment are small. It can be used for the production of aerated concrete at home. Daily output reaches about 9 cubic meters. Only one person is enough for service. In addition, due to the small size of the equipment, it is possible to place the equipment next to the site where construction work is ongoing.
If the entrepreneur does not have enough money to open a larger-scale production, then it is with the help of such an installation that you can start your own business in order to accumulate the necessary amount of money for the development of your enterprise. And this can be done in a fairly short period of time, since the material is in high demand from construction companies.
You can always buy cheaper equipment
If you decide to establish the production of this building material, then you should know that you can get a fairly large profit. The choice, as well as the cost of certain equipment, will fully depend on the size of the enterprise and on the availability of funds from the entrepreneur.
In the event that there is not so much money, you can purchase all the necessary equipment in China. You can also turn your attention to used devices.
Conclusion
This overview has listed the main devices that can be used to open your own building material manufacturing enterprise. With quite active work, entrepreneurial activity can pay off very quickly.
