How to choose equipment for the production of frame houses

Today, entrepreneurial business such as the production of frame houses is beginning to enjoy special popularity. And in order to organize your company in this field of activity, you will need to purchase all the necessary equipment. In this review, we will highlight what equipment will be required to start production.

Purchase of a minimum set of installations

So, what equipment for the production of frame houses may be required? An example of a production line with a minimum number of installations should be cited. Must buy:

1. A panel assembly line that works with material up to 10 meters long.
2. A machine that may be required to assemble window packages.
3. Lift, through the use of which it is possible to deliver window packages to the desired location.
4. The machine with which the wood will be processed. Also, equipment for the production of frame houses, such as a conveyor, will be required.
5. It is necessary to purchase a machine for cutting plates.
6. A stand for insulating rolls is required.
7. A lift is needed with which you can lift the slabs.
8. To clean the premises you will need to purchase a sawdust removal system.
9. You will need a pneumatic compressor and piping.
10. Tools for knocking are needed.

Cost of equipment

By purchasing all the necessary equipment for the production of frame houses, the supplier will need to agree on the installation supervision of the equipment and on training personnel to work with the installations. This may require about 600 thousand rubles. To purchase a technological line, an entrepreneur can spend about 12 million rubles.

What about the materials used?

The technology of frame houses includes the use of such raw materials as sawn boards from pine or spruce. Plate material or panel board may also be used. You will need to use insulation. As such material, plate heat insulation is usually used, which is characterized by fire-resistant qualification.

We need to think about providing moisture insulation. As a material in this situation, ordinary building polyethylene is used. Fastening is provided by brackets.

Additional nuances

When purchasing equipment for the production of frame houses, you should think about purchasing a fork-lift truck. Using it, the slab material will move to the assembly site of the structure. So, you should consider in more detail some of the main items of equipment.

Using the edger

Due to the installation of this type, it is possible to cut lumber for the construction of the frame into separate parts of a certain size. The machine has pneumatic feed and exactly the same clamps. In order for the specialist working with the installation to not suffer, a technology such as dual buttons is used. For machines for the production of frame houses of this type to start working, you must simultaneously press the start with two hands. The working area is protected by using a special casing. So that the cuts do not interfere with the work, a special slope was invented.

The use of radial saw

By using such a setup, it is possible to cut the material at a certain angle. This is due to the management of a special frame. The saw block moves on ball bearings.

The machine with which mineral wool is processed

When calculating frame houses, it is necessary to remember the use of thermal insulation material. To process it, it is required to use a band saw. It is equipped with a special casing, which rises due to the use of handwheels. The bottom disc is equipped with special brushes for cleaning.

Cleaning the workplace from debris

In order to get rid of traces of sawdust, you must use a special pump. You can also buy a processing machine that removes debris through a special pipeline. Such equipment in its composition usually has fire protection - special dampers that are located in the return channel. In the event that the temperature is raised to 55 degrees, the fuse will trip. It will close the shutter and shut off the voltage.

Using a pneumatic compressor

Due to the installation, it is possible to provide the production line with compressed air, which consists of a piston pneumatic compressor. A pipeline is also connected to a similar installation. He also goes to the work machines.

Using punching tools

The production line must be equipped with a hand tool, through which the assembly of frame houses takes place. In this case, we are talking about such accessories as:

1. Air guns. Due to their use, the panels are piled together and the frame is assembled. Also, with the help of such a tool, sheathing of the outer surface of the walls with special plates can occur.
2. Screwdrivers. They are powered by batteries. They are necessary in order to screw the cladding plates on the side of the panels that is internal.
3. Staplers. They should be used in the situation when a special insulation material and insulation are fastened.

Conclusion

In this review, those devices that should be included in the technological line for the production of frame-type houses were given as an example. The cost of equipment for organizing such a business, of course, is quite high. However, the payback is at a fairly good level.

With proper and competent activity, an entrepreneur will be able to get a fairly high profit. Good luck in organizing your company, which will specialize in the production of frame houses.