Features of manufacture and selection of equipment for the production of gloves

Gloves are a very important accessory that is used almost everywhere. Their main goal is to protect hands from negative mechanical and atmospheric effects. Medical gloves are used to ensure sterility of manipulation.

Advantages of the presented production

Each of you can organize your own small workshop for the manufacture of the presented products. Before making a choice of equipment for the production of gloves, you need to decide which ones you can do yourself:

• work accessories made of cotton with a layer of PVC;
• latex;
• rubber.

All these products require the use of a certain type of equipment. Your attention is invited to information on the features of the production of gloves HB.

What are the presented accessories made of?

Naturally, you must first select the raw materials that you will use for work. For gloves, you can use the following materials:

• cotton thread;
• latex;
• polyvinyl chloride;
• medium thickness thread for overlock.

What equipment should I buy for work?

The choice of a machine for the production of gloves is a very responsible matter. However, we first decide what exactly is needed. First of all, you need a knitting machine that is equipped with a number of needles that can produce many pairs of gloves at the same time.

An apparatus is also needed that will cover the edges of the finished gloves. And you also need a unit for applying PVC coating.

At the final stage of manufacturing, products are packaged, for which a special apparatus is also used. To make gloves for food production or household needs, about 8 machines are enough.

In this way, you can make about 1000 pairs per day. And you also need to purchase special racks with shapes of different sizes. They are used for applying PVC coating.

As for latex products, a special machine for the production of gloves is needed here. The working line consists of such devices: a vulcanization apparatus, a ball mill, a stirrer, a drying oven, as well as molds that are coated with latex. Naturally, such a system should be fully automated, since the manufacturing process is very delicate.

Features of the choice of equipment

In order for your workshop to work continuously, you need to choose the right equipment. To do this, determine which type of gloves you will make, since it is difficult and expensive to produce all kinds of gloves. Now you need to think about what kind of performance you are counting on. Most likely, one machine will not be enough for you. Therefore, adequately assess your financial capabilities.

Be sure to pay attention to the fact that the equipment for the production of PVC gloves must be of high quality. That is, you must ask the seller for all accompanying certificates, which will indicate the expiration date, as well as a warranty on the equipment. If necessary, you can purchase devices in installments (if possible) or buy used equipment.

Features of the use of mechanical devices

If you do not have enough funds to purchase an automated line, then it does not matter. You can use mechanical machines. They have a lot of advantages:

• the presented devices have a low cost, so the cost of production will be lower;
• in the event of a breakdown, such machines are easy to repair, as you can always find spare parts, especially since they cost a little;
• the quality of knitting CB gloves is much higher than on computerized machines;
• almost any type of yarn can be used for work, and automated equipment is designed only for expensive threads, often of foreign manufacture;
• presented products can be made even at home. In this case, you do not have to spend a lot of electricity. You can connect them to a normal outlet.

Features of manufacturing gloves HB

Now we should consider the production technology of the presented products. It consists of several stages:

1. First you need to prepare the necessary raw materials. Threads need to be well reviewed and selected quality.
2. Now it is necessary to install bobbins on equipment for the production of HB gloves. In this case, you need to add rubber to the main thread so that the products are elastic. Now you can fill the needles and start the knitting mode.
3. Naturally, you must first install the desired program and size. After the procedure is completed, gloves should be marked. At the same time, rejected couples are selected. The rest should be carefully packed.
4. Before packaging, a layer of polyvinyl chloride should be applied to the gloves and dried. If the products have minor flaws, then they can be eliminated with latex. In addition, it is necessary to overcast the edges of the gloves so that they do not begin to open. An overlock is used for this.

It should be noted that the products fit from the tips of the fingers to the cuffs. The newest equipment can perform all these operations automatically. At the same time, all the parameters for the implementation of these actions, as well as the progress of the process, are reflected on the electronic screen.

That's all the features of manufacturing gloves HB. Good luck!