Dry ice production equipment: features of choice and product manufacturing technology

Dry ice is used in many areas of life. Making it is quite simple. It is only necessary to purchase equipment for the production of dry ice. Naturally, you must also follow all safety rules when working with hazardous substances.

Product benefits

Before you purchase equipment for the production of dry ice, you need to find out about its advantages. So, among the advantages of the presented product, the following should be noted:

- the substance has no taste or smell;

- ice is not amenable to burning and is not a conductor of electricity;

- the substance can be used in various spheres of life;

- such ice gives cold much more than usual;

- during melting, the substance turns into gas, from which, in fact, it is made.

Product Areas

Before you purchase equipment for the production of dry ice, you need to decide how profitable such a business will be for you. It should be noted that the manufacture of the presented substance pays off quite quickly. In this case, you do not need to have a large number of machines. Dry ice is used for:

- storage, transportation and cooling of various food products (also the substance is used to freeze meat, various fruits and berries);

- accurate cleaning of various surfaces where abrasive materials are contraindicated;

- slowing down the growth of yeast in the bakery;

- repair of refrigeration equipment;

- pressure build-up and retardation of chemical reactions;

- creating various special effects;

- fight against rodents;

- growing and storing flowers.

In addition, the substance is used in the medical industry, in the field of funeral services, for repair, as well as for cooling computer processors. That is, the scope of the presented substance is very extensive.

What equipment is necessary for work?

Now let's figure out which installation for the production of dry ice is needed. So, first of all, you need a container for storing raw materials in liquid form. Carbon dioxide is used for work. For the manufacture you need a pelletizer. It is here that liquid raw materials enter and turns into a loose mass under the influence of cold.

Such pelletizers can work around the clock. Moreover, the productivity of the equipment is from 100 kg to a ton of the finished product in 24 hours. Naturally, choosing equipment, it is necessary to pay attention to the compliance of the machine with all the requirements of domestic and European standards.

You need to buy equipment only from authorized dealers who receive units from well-known manufacturers with a good reputation.

The design of the device and the features of its work

So, the apparatus for the production of dry ice has a fairly simple device. It consists of a large tank, where the raw materials are cooled. An engine with a special gearbox is installed inside the unit, which is connected to the pistons of the working cylinders. There are also nozzles through which liquid carbon dioxide is injected into the device.

In addition, the dry ice machine, which costs about $ 500, has an integrated heat exchanger, which turns the liquid substance into gas. There are also special pistons that push bulk ice through dies with dies. Due to this, the substance becomes granular.

Features of ice production

The presented product is usually made in the form of powder, granules or briquettes. The mass of each compressed element can range from 25 to 100 kg. As for pellets, they are now used much more. The fact is that they have a small weight and size (1-16 mm). Moreover, in some areas it is impossible to use large briquettes.

The production of the presented product is unsafe. Your employees need to be especially careful with liquid carbon dioxide. Therefore, workers must always wear protective clothing, gloves and glasses.

It should be noted that most of the modern equipment used for the production of dry ice is automated. You just need to control the manufacturing process using the remote control. In addition, the device does not take up much space, so for starters you can open the presented production even at home. Next, it will be necessary to expand production, buy additional cars.

If you do not have funds for new equipment, then you can purchase used machines. However, keep in mind that they will work with an unsafe substance, therefore they must be of high quality and satisfy all technological requirements.

That's all the features of dry ice production. Good luck!