Own business: manufacturing fridge magnets. Technology and list of equipment for the production of magnets

The refrigerator is a pretty convenient thing, used not only for its intended purpose, but also to remind you of very important matters. One has only to write on a small sheet what needs to be done in the near future, and fix it on the device by using simple magnets.

As soon as the appetite breaks out, a piece of paper with a reminder involuntarily enters the field of view. In this review, it was decided to consider in more detail how the manufacturing of fridge magnets takes place. This business idea can be successful for entrepreneurs.

What is the reason for the popularity of magnets?

Perhaps this idea played a significant role in the appearance of decorative souvenirs. It happened back in 1971. Over the entire period of its existence, this product has undergone a fairly large number of changes. From factory conveyors, their production abruptly turned into small business with a rather small down payment. And if earlier, for the production of magnets, first of all, a press and an enameling device were required, then in the modern world a decorative product for a refrigerator is quite simple to make with a computer and a printer.

But to say that in connection with such a transition the need for souvenirs has decreased, and the manufacture of fridge magnets has become less promising, is impossible. The thing is that the symbols of the era are constantly changing. This entails the demand for certain products, in which new symbolic images will be embodied. Accordingly, old items will be thrown away or hidden, and new ones will take their place on the refrigerator door.

Magnet technology is constantly being simplified

Time when making fridge magnets Passed by magnetized metal, long gone. Modern equipment made it possible to apply a very thin layer of ferromagnetic materials to almost any polymer product.

They are able to hold magnetic induction for a sufficiently long period of time. The substrate is usually vinyl. On the other side of this material, a special coating is applied, onto which a specific image is subsequently glued.

Vinyl is not an expensive material.

Based on all of the above, we can say: there is nothing strange in the fact that over time the manufacture of fridge magnets has become possible at home. Vinyl for making magnets is a material that is magnetized rubber of various thicknesses. It can be produced not only in rolls, but also in sheets. The cost of one roll reaches 4.3 thousand rubles. According to many experts, vinyl is an ideal material used for the manufacture of a variety of magnetic calendars, leaflets, souvenirs and notebooks.

Finding a customer will not be difficult

The manufacture of magnets as a business makes certain demands. First of all, they relate to the sale of products. But to find customers who can purchase a wholesale batch of magnets is not very difficult. The whole complexity of this process lies in the need to predict a particular corporate event.

Magnets have always been popular at various exhibitions, as they are able to carry a certain logo. But even if there is no customer for a wholesale batch, you can always produce single items.

What is needed to produce a magnet?

In order to organize a business, some specialized equipment for the manufacture of magnets is not required. Just need a computer. From software, you need to purchase and install any graphics editor. You will also need an inkjet printer, cutter and batch laminator. The manufacturing procedure for magnetic products takes six steps.

1. On transparent plastic with hot glue, you will need to print the image after first performing its mirror image in the editor.
2. The transparent plastic on which the drawing is applied must be separated from the substrate and turned over.
3. The resulting material must be passed through the laminator.
4. Separate the backing that protects the adhesive layer from the sheet.
5. A sheet with a pattern printed on it will need to be glued to vinyl.
6. Received products must be cut down.

There is nothing complicated in the manufacturing procedure. Images can be absolutely any. It is only necessary to take into account the factor that instead of paper you need to use a transparent material - plastic.

Based on all of the above, it can be noted that the whole procedure will not require too much free time. But at the same time, you can get magnets with any picture and various shapes. The thickness of such products can reach only one and a half millimeters, however, the magnets will be strong enough.

High business profitability

The entrepreneurial idea, the essence of which is the production of magnets, has a profitability of 100 percent. And this is even taking into account the minimum prices that will be formed on the product. About 8 magnets can be made on one A4 sheet. The cost of such souvenirs will vary in the range from 50 to 100 rubles. The cost of the manufactured magnet will not exceed 40 rubles.

Starting a magnet business is not too difficult. The entrepreneur will not be required to purchase too expensive equipment and invest too much money at the initial stage. Even with a simple computer and printer in modern conditions, you can print a high-quality picture.

Lack of any competition

It is also worth noting that this entrepreneurial idea will become successful because there is no competition in this area of ​​activity. The market is not full of souvenirs of this kind, and in some cities an entrepreneur is even capable of becoming a monopolist. Not very high cost of all products will allow you to make a profit that will significantly exceed all initial costs. That is why this business is considered highly profitable.

Summing up under all the above, it can be noted that for the first time an entrepreneur will need about 50 thousand rubles. But the whole amount will be fully paid back in two months, or even earlier.

What is the peculiarity of acrylic magnets?

Every day, on the refrigerators of many people, you can increasingly see acrylic magnets. They are quite beautiful and original. Therefore, their popularity is understandable. Besides making acrylic magnets are not too complicated. They consist of only two parts:

1. The body that serves as the workpiece. The material used is transparent plastic - acrylic.
2. Printing insert.

During the creation of the magnet, the image is simply inserted into the previously made housing and latched. With the help of prefabricated housings already available, the production of acrylic magnets is proceeding rapidly.

Production of sunset magnets

The main difference possessed by sunset magnets is the iron base. The manufacturing technology of the magnets of this sample is as follows:

1. The acquisition of a specialized machine. It is not a very large press, with which you can roll the edges of iron billets.
2. There should be printing elements - images, basics, magnetic vinyl and an inner insert.

The manufacture of sunset magnets has its negative sides. The disadvantages include the high cost and not too wide range of types and shapes of the magnets that were made.

The positive features include the possibility of producing sufficiently large quantities of goods in a very short period of time and the simplicity of organizing an entrepreneurial idea. In addition, using the machine you can make not only magnets, but also badges.

The difficulty of manufacturing permanent magnets

The technology for manufacturing permanent magnets is very complex. Therefore, at home it will be difficult to make them. For their production should use the following materials:

1. Barium and strontium magnetically hard ferrites.
2. NdFeB magnets.
3. Rare earth magnets.
4. Magnets "Alnico".
5. Polymer permanent magnets.

Advertising activity

In order to attract potential customers and interest them in their products, it is best to create a business card website. In addition, advertisements can be placed on other portals of similar subjects. Large-scale advertising is not advisable, as the company will be engaged in wholesale. You can also advertise your activities through supermarkets, selling part of the magnets with their help.

Selling magnets can bring a fairly high profit. Therefore, it makes sense to try hard so that the income is very high.